The Frigidaire PureSource 3 Water Filter WF3CB is tested and certified by the NSF to reduce impurities and provide cleaner, better tasting drinking water. If you require the Frigidaire PureSource 3 Water Filter WF3CB, consider upgrading to the ULTRAWF for increased contaminant reduction.
Cleaner, better tasting water
Quick and easy filter replacement
Geniune Frigidaire replacement filter
Genuine OEM Product
Used In Brands Electrolux, Frigidaire, Kenmore
Manufacturer’s Id WF3CB
Actual Size (in) 9 inches (length) x 2 1/2 inches (outside diameter)
Actual Size (cm) 22.86 x 6.35
Media Carbon Block
Primary Filter Media Activated Carbon Block
Filter Life (gallons) 200
Filter Life (liters) 757.08
Filter Life (months) 6 months
Micron Rating (Nominal) 0.5
Operating Pressure (psi) 30 – 100
Operating Temperature (Â°F) 33 – 100
Operating Temperature (Â°C) 0.6 – 37.8
Flow Rate (gpm) 0.5
Flow Rate (lpm) 1.893
Tested and certified by NSF International against ANSI / NSF Standards 42 and 53 for the reduction of:
1,2-Dichlorobenzene / O-Dichlorobenzene (ODCB)
2,4-Dichlorophenoxyacetic Acid (2,4-D)
Bad Taste and Odor
Chlorine Taste & Odor
Chlorobenzene / Monochlorobenzene
Particulates (Class I)
Tetrachloroethene / Perchloroethylene (PERC)
The WF3CB_FILTER does not reduce fluoride.
1. Push in on the end of the existing filter to remove.
2. Pull the existing filter straight out of the housing and discard.
3. Insert the new filter into the housing until it snaps into place.
4. Run water through the new filter for about three to four minutes prior to first use.
The WF3CB_FILTER is comparable with the following part numbers